Spring Machine Forming Machine RX-60 RX-20A,RX-40A MX Series MCS-20 RS-8 AX Series MCS Series SX Series FX Series Coiling Machine PCX-40A PCX-20A PC-8A CS-8 CX-6A,CX-8,CX-15 CX-2A discontinued SCD-7 MCS-G series MCX series PC/PC-H Series SCD-5	CS-8 is the ideal cost saving replacement for mechanical coiling machines. Careful consideration of the design and features have resulted in an unprecedented low price for a quality CNC coiling machine. Computer Controlled Coiling Machine The standard CS-8 uses 1 Point coiling for right and left hand coiling. Free length control, using static capacitor sensor, is supplied as standard. CS-8 Features CS-8 is the ideal cost saving replacement for mechanical coiling machines. Careful consideration of the design and features have resulted in an unprecedented low price for a quality CNC coiling machine. The standard CS-8 uses 1 Point coiling for right and left hand coiling. 2 Point coiling is available as an option. All tools are common with PC-8. Small machine space is achieved by combining machine and computer in one unit. Free length control, using static capacity sensor, is supplied as standard. CS-8 has 4 standard axes: Feed, Cut, Diameter and Push Pitch. Spring parameters can be controlled with an optional camera system. An optional Wireless LAN interface allows machine management over your network. Specifications Machine Specifications CS-8 Forming Capability Wire Dia. 0.1-0.8mm D/d 4 Outside Dia. 15mm max. Peripheral Device Control 12ports Power Requirements 3 Phase 10A Machine Dimensions Height 1630mm Width 1060mm Depth 780mm Weight Feature for Servo Motor CS-8 Feed Min. Increment 0.01mm Cut Slide Min. Increment 0.001 Push Pitch Min. Increment 0.001mm Diameter Min. Increment 0.001mm "Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries. Please note the contents of this web page is subject to change without notice. Download of the catalogue cs08.pdf(1.56MB) * Abobe Reader is neceeary for reference.