Spring Machine Forming Machine RX-60 RX-20A,RX-40A MX Series MCS-20 RS-8 AX Series MCS Series SX Series FX Series Coiling Machine PCX-40A PCX-20A PC-8A CS-8 CX-6A,CX-8,CX-15 CX-2A discontinued SCD-7 MCS-G series MCX series PC/PC-H Series SCD-5	Computer Controlled Coiling Machine CX-15 The CX series utilizes the easy operation of the PC-Series, the high speed productivity of the PCX-Series and the extreme accuracy of CX-2. A newly developed 2 point coiling servo unit offers simple operation for coiling fine wire with a combined high precision output. Features The standard 6 axes equipped are: Feed Axis, Cut Axis, Wedge Pitch Axis, Push Pitch Axis, Center Base Axis and Coiling Axis. Also standard is the 2 Point Right Hand Coiling Unit. The Cut Slide, Arbor and Wedge Pitch Slide are mounted to the Center Base Axis similar to the PCX-Series. This composition allows for faster diameter changes as no change to the cut position is needed. CX-8 adopts two pairs of Feedroll which controls the deformation of wire by pressure of Feedroll minimum so that coiling for small D/d spring can be processed stably. Optional Accessories: 2 Point Left Hand Coiling Unit, 1 Point 2 Dimensional Unit, 1 Point 3 Dimensional Unit and Arbor Retraction Unit. 2 point Initial Tension unit can be mounted as an option. Specifications Machine Specifications CX-6 CX-8 CX-15 Forming Capability Wire Diameter 0.1-0.6mm 0.1-0.8mm 0.4-1.5mm D/d 4 4 4 Outside Dia. 15mm max. 15mm max. 40mm max. Pneumatic Solenoid Valve 2pcs. 2pcs. 2pcs. Peripheral Device Control 12ports 12ports 12ports Power Requirements 3 Phase 10A 10A 15A Machine Dimensions Height 1495mm 1495mm 1693mm Width 600mm 600mm 1037mm Depth 500mm 500mm 711mm Weight 500kg 300kg 780kg Computer Dimensions Height 1600mm 1600mm 1600mm Width 540mm 540mm 540mm Depth 540mm 540mm 540mm Weight 210kg 210kg 210kg Installation Area Width 2100mm 2100mm 2500mm Depth 500mm 500mm 800mm Feature for Servo Motor CX-6 CX-8 CX-15 Feed Min. Increment 0.01mm 0.01mm 0.02mm Max. Speed 220m/min 220m/min 150m/min Motor Rated Output 750W 1400W 2600W Cut / Wedge Pitch Min. Increment 0.001 0.001 0.01 Motor Rated Output 200W 200W 750W Push Pitch Min. Increment 0.001 0.001 0.01 Motor Rated Output 100W 100W 200W Diameter Min. Increment 0.001 0.001 0.01 Motor Rated Output 100W 100W 200W Center Base Min. Increment 0.001 0.001 0.01 Motor Rated Output 200W 400W 200W Optional Accessories "Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries. Please note the contents of this web page is subject to change without notice. Download of the catalogue cx_series.pdf(3.75MB) * Abobe Reader is neceeary for reference.