Spring Machine Forming Machine RX-60 RX-20A,RX-40A MX Series MCS-20 RS-8 AX Series MCS Series SX Series FX Series Coiling Machine PCX-40A PCX-20A PC-8A CS-8 CX-6A,CX-8,CX-15 CX-2A discontinued SCD-7 MCS-G series MCX series PC/PC-H Series SCD-5	Our best seller spring making machine, MCS, is now equipped with the Rotary Wire Feed. With rich source of options being available, you can optimize this machine just to suit your need. Computer Controlled Spring Making Machine MCS-20 Features Rotary Wire Feed and Rotary Wire Guide mechanism provides for easy complex forming without changing the position of the slides. Rotary Wire Feed and Rotary Wire Guide mechanism provides for easy complex forming without changing the position of the slides. The machine is equipped with Feed, Cam, Rotary Wire Guide and Rotary Wire Feed axes as standard. 3 optional Servo Spinner Units and 2 optional Servo Linear Units can be easily added to make the MCS-20 an 8 axes machine. You can customize MCS-20 as you wish with numerous optional accessories. (Slide Base and Cam Shaft (8sets), Cut Holder (1pc.), Tool Holder A (1pc.), Tool Holder B (1pc.) are equipped as standard.) The slides can be installed at any angle around the circular table. (patented) The slide layout can be changed simply by altering the mounting position on the slide base for tool holders and servo drive unit. Maximum slide stroke is 67mm. This MCS-20 machine provides wide space around the wire guide enhancing forming capability. Twin Cams are ready for more higher speed production. (1 set of Retractable Lever and Twin Cam for Cut axis is equipped as standard.) All tools, cams, tool holders and attachment items are compatible to those of AX-20 machine. The Image sensor (optional) feature can be equipped on the latest computer. Specifications Machine Specifications MCS-20 Forming Capability Wire Diameter 0.5-2.0mm Pneumatic Solenoid Valve 4pcs. Peripheral Device Control 12ports Power Requirements 3 Phase 30A Machine Dimensions Height 1880mm Width 1080mm Depth 1300mm Weight 1540kg Computer Dimensions Height 1600mm Width 540mm Depth 540mm Weight 210kg Installation Area Width 1825mm Depth 2300mm Feature for Servo Motor MCS-20 Feed Min. Increment 0.02mm Motor Rated Output 2000W Cam Min. Increment 0.05度 Motor Rated Output 2600W Rotary Wire Feed Min. Increment 0.1度 Motor Rated Output 5000W Rotary Wire Guide Min. Increment 0.1度 Motor Rated Output 400W Spinner (optional) Min. Increment 0.001度 Motor Rated Output 400W Linear (optional) Min. Increment 0.01度 Motor Rated Output 400W Computer Specifications CPU Pentium Processor Program 2000 Steps Program Storage USB flash memory & 3.5 inch FDD Display 15 inch TFT Color LC Display Operating Temp 0 - 45 degree "Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries. Please note the contents of this web page is subject to change without notice. Download of the catalogue mcs20.pdf(1.46MB) * Abobe Reader is neceeary for reference.