Spring Machine Forming Machine RX Series MX-8 MX-20A MX-40 MCS-20 AX Series MCS Series SX Series Coiling Machine PCX-40A PCX-20A PC-8A CS-8 CX-6A,CX-8,CX-15 CX-2A Coiling Process Controller SCD-7 SCD-5 discontinued MCS-G series MCX series PC/PC-H Series	"MX-20A", the evolution of the ultimate Multi-Slide Spring Forming Machine! Computer Controlled Spring Forming Machine MX-20A Once you have installed tools, all you have to do is programming, thus minimum set-up time and maximum production speed is achieved, resulting cost effective production. The newly developed Body Slide is equipped with the Outside Diameter Axis, enabling to control the position of Body Tool, three dimensionally. Features The MX-20A still retains all of the functions of the MX-20. The newly developed Body Slide is equipped with the Outside Diameter Axis, enabling to control the position of Body Tool, three dimensionally. Servo Swing Mechanism numerically controls the lateral (right / left) position of all slides, thus the initial tension of the spring body or the offset position of the Spinner is easily adjusted. Other than the body slides, all tool slides are driven by an independent servo motor, via crank mechanism, resulting in high-speed precision operation. Rack & Pinion driving mechanism (optional) is available and applicable for the all linear motion Slides. This mechanism enables to control in and out position of the Spinner, Pitch tool, etc., at uniform velocity. Rotary Wire Feed and Rotary Wire Guide mechanism provides for easy complex forming without changing the position of the slides. Dual Action Spinner (optional) is also made available. This can rotates the Arbor as well as the Spinner Tool. The Image sensor (optional) feature can be equipped on the latest computer. Specification Machine Specification MX-20A Forming Capability Wire Dia. 0.5-2.0mm Pneumatic Solenoid Valves 4pcs. Peripheral Device Control 16ports Power Requirement 3 Phase 30A Machine Dimensions Height 2080mm Width 1080mm Depth 1280mm Net Weight 1360kg Computer Dimensions Height 1600mm Width 540mm Depth 540mm Net Weight 210kg Installation Area Width 2800mm Depth 2300mm Computer Specification CPU Pentium Processor Program 2000 Steps Program Storange USB flash memory 3.5 inch FDD Display 15 inch TFT Color LC Display Operating Temp. 0 - 45 degree Feature for Servo Motor MX-20A Feed Min. Increment 0.02mm Max. Speed 82m/min Motor Rated Output 2000W Rotary Wire Feed Min. Increment 0.1deg. Motor Rated Output 5000W Rotary Wire Guide Min. Increment 0.1deg. Motor Rated Output 400W Swing Min. Increment 0.01mm Motor Rated Output 400W Stroke +/- 8mm Body Tool Slide (Rack & Pinion) Min. Increment 0.01mm Motor Rated Output 750W Stroke 105mm Tool Slide (Crank) Min. Increment 0.01deg. Motor Rated Output 750W Stroke 100mm Diameter Min. Increment 0.01 Motor Rated Output 400W Stroke 17.6mm Spinner Min. Increment 0.001 Motor Rated Output 750W Spinner Arbor (optional) Min. Increment 0.001 Motor Rated Output 400W "Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries. Please note the contents of this web page is subject to change without notice. Download of the catalogue mx20a.pdf(1.45MB) * Abobe Reader is neceeary for reference.