Spring Machine Forming Machine RX-60 RX-20A,RX-40A MX Series MCS-20 RS-8 AX Series MCS Series SX Series FX Series Coiling Machine PCX-40A PCX-20A PC-8A CS-8 CX-6A,CX-8,CX-15 CX-2A discontinued SCD-7 MCS-G series MCX series PC/PC-H Series SCD-5	"MX series", the evolution of the ultimate Multi-Slide Spring Forming Machine! Computer Controlled Spring Forming Machine MX-20A Once you have installed tools, all you have to do is programming, thus minimum set-up time and maximum production speed is achieved, resulting cost effective production. The newly developed Body Slide is equipped with the Outside Diameter Axis, enabling to control the position of Body Tool, three dimensionally. Features The newly developed Body Slide is equipped with the Outside Diameter Axis, enabling to control the position of Body Tool, three dimensionally. Servo Swing Mechanism numerically controls the lateral (right / left) position of all slides, thus the initial tension of the spring body or the offset position of the Spinner is easily adjusted. Other than the body slides, all tool slides are driven by an independent servo motor, via crank mechanism, resulting in high-speed precision operation. Rack & Pinion driving mechanism (optional) is available and applicable for the all linear motion Slides. This mechanism enables to control in and out position of the Spinner, Pitch tool, etc., at uniform velocity. Rotary Wire Feed and Rotary Wire Guide mechanism provides for easy complex forming without changing the position of the slides. The Image sensor (optional) feature can be equipped on the latest computer. Distance between the feedrollers to the wire�fs cutting surface having made extremely short, MX-8 had achieved good response on the wire Rotary Wire Feed even when working with fine size wire. MX-40A : Dual Action Spinner is standard equipment. This can rotates the Arbor as well as the Spinner Tool. (MX-20A / optional) Specification Machine Specification MX-8 MX-20A MX-40A Forming Capability Wire Dia. 0.2-0.8mm 0.5-2.0mm 1.5-4.0mm Pneumatic Solenoid Valves 4pcs. 4pcs. 4pcs. Peripheral Device Control 12ports 12ports 12ports Power Requirement 3 Phase 10A 30A 50A Machine Dimensions Height 1650mm 2080mm 2240mm Width 950mm 1080mm 1940mm Depth 970mm 1280mm 1910mm Net Weight 820kg 1360kg 3300kg Computer Dimensions Height 1600mm 1600mm 1600mm Width 540mm 540mm 540mm Depth 540mm 540mm 540mm Net Weight 210kg 210kg 210kg Feature for Servo Motor MX-8 MX-20A MX-40A Feed Min. Increment 0.01mm 0.02mm 0.02mm Max. Speed 70m/min 82m/min 60m/min Motor Rated Output 750W 2000W 5000W Rotary Wire Feed Min. Increment 0.1deg. 0.1deg. 0.1deg. Motor Rated Output 400W 5000W 7500W Rotary Wire Guide Min. Increment 0.1deg. 0.1deg. 0.1deg. Motor Rated Output 100W 400W 750W Swing Min. Increment 0.002mm 0.01mm 0.01mm Motor Rated Output 100W 400W 1600W Stroke +/- 5.5mm +/- 8mm +/- 15mm Body Tool Slide (Rack & Pinion) Min. Increment 0.01mm 0.01mm 0.01mm Motor Rated Output 200W 750W 1600W Stroke 42mm 105mm 120mm Tool Slide (Crank) Min. Increment 0.01deg. 0.01deg. 0.01deg. Motor Rated Output 200W 750W 1600W Stroke 40mm 100mm 120mm Diameter Min. Increment 0.001 0.01 0.001 Motor Rated Output 100W 400W 750W Stroke 8mm 17.6mm 26mm Spinner Min. Increment 0.001 0.001 0.001 Motor Rated Output 50W 750W 1600W Spinner Arbor (MX-20A / optional) Min. Increment 0.001 0.001 Motor Rated Output 400W 400W Computer Specification CPU Pentium Processor Program 2000 Steps Program Storange USB flash memory 3.5 inch FDD Display 15 inch TFT Color LC Display Operating Temp. 0 - 45 degree "Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries. Please note the contents of this web page is subject to change without notice. Download of the catalogue mx.pdf(1.48MB) * Abobe Reader is neceeary for reference.