Spring Machine Forming Machine RX-60 RX-20A,RX-40A MX Series MCS-20 RS-8 AX Series MCS Series SX Series FX Series Coiling Machine PCX-40A PCX-20A PC-8A CS-8 CX-6A,CX-8,CX-15 CX-2A discontinued SCD-7 MCS-G series MCX series PC/PC-H Series SCD-5	The RS-8 Computer Controlled Spring Making Machine with Rotary Wire Feed, low cost and high performance makes its debut. Computer Controlled Spring Making Machine Sufficient optional equipments can customize this machine as you request. RS-8 is the best successor machine to MCS-8. RS-8 Features Rotary Wire Feed and Rotary Wire Guide mechanism provides for easy complex forming without changing the position of holders. Install Linear Guides on the machine face directly and except the slides for easy setting. The change of layout is carried out by changing of tool holders and servo units. The machine is equipped with Feed, Cam, Rotary Wire Guide and Rotary Wire Feed axes as standard. 2 optional Servo Spinner Unit and Servo Linear Unit can be easily added to make the machine. Spinner and Linear can be mounted on the same holder and it can operate the spinner tool by same speed. Tools and Cams are compatible with those of MCS-8 Type machine. (* Rotary Wire Guide is compatible with it of MCX-10 and AX-10 so as to control long leg spring.) The image sensor (optional) feature can be equipped on the latest computer. Specifications Machine Specifications RS-8 Forming Capability Wire Dia. 0.2-0.8mm Peripheral Device Control 12ports Power Requirements 3 Phase 15A Machine Dimensions Height 1490mm Width 670mm Depth 820mm Weight 500kg Computer Dimensions Height 1600mm Width 540mm Depth 540mm Weight 210kg Installation Area Width 1350mm Depth 820mm Feature for Servo Motor RS-8 Feed Min. Increment 0.02mm Max. Speed 112m/min. Motor Rated Output 750W Cam Min. Increment 0.05deg. Motor Rated Output 800W Rotary Wire Guide Min. Increment 0.1deg. Motor Rated Output 200W Rotary Wire Feed Min. Increment 0.1deg. Motor Rated Output 2400W Spinner (Optional) Min. Increment 0.001 Motor Rated Output 50W Linear (Optional) Min. Increment 0.01mm Motor Rated Output 100W "Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries. Please note the contents of this web page is subject to change without notice. Download of the catalogue rs08.pdf(3.94MB) * Abobe Reader is neceeary for reference.