Spring Machine
Forming Machine
RX-60
RX-20A,RX-40A
MX Series
MCS-20
RS-8
AX Series
MCS Series
SX Series
FX Series
Coiling Machine
PCX-40A
PCX-20A
PC-8A
CS-8
CX-6A,CX-8,CX-15
CX-2A
discontinued
SCD-7
MCS-G series
MCX series
PC/PC-H Series
SCD-5
|
Innovative Mechanisms for 21st century.
Computer Controlled Spring Forming Center
RX-40A
The RX is equipped with 2 sets of Three Dimensionally Controllable
Rotary Tool Changers.
Up to 12 Forming Tools or Spinners are can be mounted on the Changers.
Further independent axes control Rotary Wire Guide, Rotary Wire Feed,
Cut Slide and Auxiliary Slide.
In total this innovative Spring Forming Center has 15 axes.
|
| Features |
- The RX-A still retains all of the functions of the RX.
- The RX-A has 2 sets of three dimensionally controlled servo slides with rotary tool changers. A combination of up to 12 forming tools and spinners can be mounted on the changers. Also, independent axes control the rotary wire guide, rotary wire feed, cut slide and the auxiliary slide.
- The RX-A computer controlled spring forming center has a total of 15 axes.
- The RX-A controls the position for all tools and spinners by three dimensionally controllable servo slides.
- The required tools for spring forming are easily selected using the rotary tool changers which is controlled by the program.
- Rotary wire feed and rotary wire guide mechanism facilitates complex forming without changing the position of the slide.
- The coiling tool adapts to different wire diameter by changing the tip of coiling tool.
- The high rigidity spinner tool, spinner tool holder and arbor are available in a wide variety of sizes.
|
| Specification: |
Machine
| RX-20A | RX-40A |
|---|
| Forming Capability | Wire Dia. | 0.5-2.0mm | 1.5-4.0mm |
| Feed Axis | Min. Unit | 0.02mm | 0.02mm |
| Max. Speed | 82.3m/min | 60m/min |
| Motor | 2000W | 5000W |
| Rotary Wire Feed Axis | Min. Unit | 0.1 | 0.1 |
| Motor | 5000W | 7500W |
| Rotary Wire Guide Axis | Min. Unit | 0.1 | 0.1 |
| Motor | 400W | 750W |
| Cut Slide Axis / Aux. Slide Axis | Min. Unit | 0.1 | 0.1 |
| Motor | 750W | 1600W |
| Table Horizontal Axis | Min. Unit | 0.01mm | 0.01mm |
| Motor | 1000W | 3300W |
| stroke | 120mm | 150mm |
| Table Vertical Axis | Min. Unit | 0.01mm | 0.01mm |
| Motor | 400W | 1600W |
| stroke | 40mm | 60mm |
| Table In and Out Axis | Min. Unit | 0.01mm | 0.01mm |
| Motor | 1000W | 2000W |
| stroke | 120mm | 150mm |
| Spinner Axis | Min. Unit | 0.001 | 0.001 |
| Motor | 400W | 1600W |
| Rotary Tool Changer Axis | Min. Unit | 0.001 | 0.001 |
| Motor | 400W | 1600W |
| Pneumatic Solenoid Valves |
| 8 pcs. | 8 pcs. |
| Peripheral Device Control |
| 12ports | 12ports |
| Power Supply |
| 30A | 50A |
| Machine Dimension | Height | 1825mm | 2138mm |
| Width | 1630mm | 2110mm |
| Depth | 1555mm | 2186mm |
| Weight | 2100Kg | 4100Kg |
| Computer Dimentions | Height | 1600mm | 1600mm |
| Width | 540mm | 540mm |
| Depth | 540mm | 540mm |
| Weight | 210kg | 210kg |
| Installation Area | Width | 2070mm | 2590mm |
| Depth | 2600mm | 3800mm |
|
Computer Specifications
| CPU | Pentium Processor |
| Program | 2000 Steps |
Program
Storage | USB flash memory
3.5 inch FDD |
| Display | 15 inch TFT Color LC Display |
Operating
Temp | 0 - 45 degree |
|
Product Sample
|
"Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries.
Please note the contents of this web page is subject to change without notice.
Download of the catalogue rxa.pdf(2.81MB)
* Abobe Reader is neceeary for reference.
|
