PRODUCTS

Home  >  Spring Making Machine/ Forming Machine  >  RM-20 Computer Controlled Spring Forming Machine

RM-20 Computer Controlled Spring Forming Machine

RM-20

Features

  • The upper half of the machine is equipped with a Tool Changer as featured on the RX series machines, capable of holding 6 different tools, including up to 3 Spinner Tools. One of those six tools can be easily selected, as desired, and then numerically controlled in 3-dimensional movement.
  • The RM-20 is equipped with 9 servo axes as standard. Control of the spring body diameter and initial tension, as well as positioning of the spinner slides, are all simplified with numerical control of the spring programing.
  • The Rotary Wire Feed and Rotary Wire Guide mechanisms make complex forming easier as there is no need to change the position of the slides.
  • The lower half of the machine is equipped with five cam shafts (driven on one servo axis) as standard, for mounting the Cut Slide and other tool slides.
  • An optional servo spinner slide can be mounted on the cam axis.
  • The optional Image Sensor can be used with the latest computer.

SPECIFICATION

Machine Specification
Machine Model RM-20
Forming Capability Wire Diameter 0.8-2.0mm
D/d(Min.)
Outside Dia.(Max.)
Machine Dimensions Height 2100mm
Width 1360mm
Depth 1590mm
Weight 1630kg
Machine Dimensions Height 1600mm
Width 410mm
Depth 410mm
Weight 220kg
Power Requirements 30A
Peripheral Device Control 12ports
External Memory USB
Operating Temp 0-45℃
Servo axes features
Machine Model RM-20
Feed Min. Increment 0.01mm
Max. Speed 82m/min.
Cam Min. Increment 0.01°
Max. Speed 166rpm
Rotary Wire Feed Min. Increment 0.01°
Rotary Wire Guide Min. Increment 0.01°
Table Horizontal Min. Increment 0.01mm
Stroke 160mm
Table Vertical Min. Increment 0.01mm
Stroke 100mm
Table Back and forth Min. Increment 0.01mm
Stroke 120mm
Spinner Min. Increment 0.0001
Optional servo axes features
Machine Model RM-20
Spinner Min. Increment 0.0001
Linear Min. Increment 0.01mm
Stroke 70mm

Download of the catalogue

Please note contents of this web page is subject to change without notice.

pagetop