Home  >  Coiling Machine  >  CX-2A Computer Controlled Coiling Machine

CX-2A Computer Controlled Coiling Machine

Ultimate coiling machine for extremely fine wire in addition, it has evolved.



  • The CX-2A exclusive use wire guide came to pass the extremely fine material easily in addition by having become an upper and lower division type by the structure that the entrance side has combined with the exit side.(The tool of CX-2 can be used with CX-2A excluding a part of the tool.)
  • The Image sensor (optional) feature can be equipped on the latest computer.
  • CX-2A features such as free length control, outside diameter control by static capacity sensor (optional).
  • CX-2A has 5 axes as standard, feed axis, cut axis, diameter axis, push pitch axis, arbor retraction axis.(2nd diameter axis unit (optional) can be mounted on CX-2A.)
  • The position of feed unit can be adjusted horizontally 15mm. When the relative position between the feed roll and the wire guide or the length of the wire guide have changed, you can adjust the horizontal position of feed unit so that the front edge of wire guide is in contact with the arbor.
  • You can install the Servo slide at any angle on the Slide table according to the various way of coiling such as 1 or 2 point, the push pitch or the wedge pitch. (Optional slide, tools, etc. are necessary for 2 Points coiling.)


Machine Specification
Machine Model CX-2A
Forming Capability Wire Diameter 0.03-0.2mm
Outside Dia.(Max.) 4mm
Machine Dimensions Height 1405mm
Width 650mm
Depth 635mm
Weight 500kg
Machine Dimensions Height 1600mm
Width 540mm
Depth 540mm
Weight 210kg
Power Requirements 5A
Peripheral Device Control 12ports
External Memory USB
Operating Temp 0-45℃
Servo axes features
Machine Model CX-2A
Feed Min. Increment 0.002mm
Max. Speed 61m/min.
Cut Slide Min. Increment 0.1
Max. Speed 600rpm
Push Pitch Min. Increment 0.001mm
Diameter Min. Increment 0.001mm
Stroke 10mm
Arbor Retraction Min. Increment 0.001mm
Stroke 4mm
Optional servo axes features
Machine Model CX-2A
Wedge Pitch Slide Min. Increment 0.001mm
2nd. Diameter Min. Increment 0.001mm

Download of the catalogue

Please note contents of this web page is subject to change without notice.